New Honda Integra – motorcycle performance with scooter comfort and protection

October 24, 2011 – (Motor Sports Newswire) – Honda reveals the exciting new Integra. This is the first model to feature a new lightweight liquid-cooled, in-line 2-cylinder 670cm3 engine that delivers strong torque at low to medium rpm with low exhaust emissions and superb fuel efficiency. It is combined with the second generation of Honda’s innovative Dual Clutch Transmission, providing the convenience of an automatic transmission with the option of a manual mode if desired.

As well as being practical and fun to ride, the Integra is a bold and original styling statement, fusing new forms, slick surface treatments and strong lines. It offers a high level of wind protection and a relaxed, comfortable riding position.


Type Liquid-cooled 4-stroke 8-valve, SOHC parallel 2-cylinder
Displacement 670cm3
Bore x Stroke 73 x 80mm
Compression Ratio 10.7: 1
Max. Power Output 38.1kW/6.25min-1 (35.0kW/6,250min-1 – 95/1/EC)
Max. Torque 62Nm/4.75min-1 (60Nm/4,750min-1 – 95/1/EC)
Fuel System
Carburation PGM-FI electronic fuel injection
Throttle Bore 36mm
Aircleaner 5.8
Fuel Tank Capacity 10.7: 1
Max. Power Output 14.1litres
Fuel Consumption 27.9km/l (3.579 L/100km (WMTC D-Mode) / 3.585 L/100km – (WMTC D-Mode)*)
Electrical System
Ignition System Computer-controlled digital transistorised with electronic advance
Ignition Timing 12° BTDC (idle) ~ 53.9° BTDC (6.600min-1)
Sparkplug Type IFR6G-11K
Starter Electric
Battery Capacity 12V/11AH
Headlight 212V, 60W x 1 (low)/55W x 1 (high)
Clutch Wet, multiplate hydraulic 2-clutch
Clutch Operation D mode/S mode/Manual mode
Transmission Type 6-speed Dual Clutch Transmission
Primary Reduction 1.92
Gear Ratios 1 2.67
2 1.9
3 1.45
4 1.2
5 1.03
6 0.84
Final Reduction 2.44
Final Drive Chain
Type Diamond; steel pipe
Dimensions (LxWxH) 2,195 x 790 x 1,440mm
Wheelbase 1,525mm
Caster Angle 27°
Trail 110mm
Seat Height 790mm
Ground Clearance 135mm
Kerb Weight 238kg (F: 49.8kg; R: 50.2kg)
Max. Carrying Capacity 195kg
Type Front 41mm telescopic fork, 120mm travel
Rear Monoshock damper, Pro-Link swingarm, 120mm travel
Type Front multi-spoke cast aluminium
Rear multi-spoke cast aluminium
Rim Size Front 17 x MT3.5
Rear 17 x MT3.5
Tyre Size Front 120/70-17 ()
Rear 160/60-17 ()
Tyre Pressure Front 250kPa
Rear 290kPa
Type Front 320mm single wavy hydraulic disc with 3-piston calipers and sintered metal pads, ABS/CBS as standard
Rear 240mm single wavy hydraulic disc with single-piston caliper and sintered metal pads, ABS/CBS as standard

All specifications are provisional and subject to change without notice.


1 Comment

Comments are closed.